manualshive.com logo in svg

multicomp pro MP700852, User Manual

Share
Download
multicomp pro MP700852 User Manual Download Page 33

Page <33>

V1.0

07/01/22

Newark.com/multicomp-pro
Farnell.com/multicomp-pro
sg.element14.com/b/multicomp-pro

5)  [UpLine Edit►]

Upper line editing is used to edit the control line above the trace, depending on the trace.

6)  [LowLine Edit►] 

Lower line editing is used to edit the control line above the trace, depending on the trace.

7)  [Return]
Return to the previous menu.

5.18  [Meas Setup]

Measurement setting menu for the corresponding measurement parameter settings when adjacent channel power, channel 

power, occupied bandwidth measurement mode is turned on.

5.18.1  [Channel BW]

Set the bandwidth of the channel power measurement, and set the total display power percentage of bandwidth.

5.18.2  [Channel Interval]

Set the center frequency difference of the primary channel to the adjacent channel.

5.18.3  [Channel Nums]

Set the number of upper and lower adjacent channels measured by adjacent channel power.

5.18.4  [Power Percent]

Set the power ratio of occupied bandwidth.

5.19  [System]

A soft menu for system parameter settings pops up. Including [System ►], [ Setting ►], [PowerOn / Preset ►], [ Calibration 

►]. For first time you use the spectrum analyzer, set the date and time, the system will store the settings, restart the machine 

after power off won’t change the settings.

5.19.1  [System►]

Pop up system information and system log soft menu.
1) [System Info]

2) [Firmware Update]

3) [Option]

5.19.1.1  [System Info]

Press to display system information.

5.19.1.2  [Firmware Update]

1.  Create a folder named “spectrum” (lowercase) on the root directory of the USB memory device, and copy the firmware file 

onto this folder.

2.  Insert the USB memory device into the front-panel USB connector on your instrument. Press [System] key on the front 

panel, press [System ►], and press [Firmware Update] to execute firmware update. 

3.  The analyzer will perform the update process. The upgrade procedure will take approximately 30 seconds. During the 

update process, do not remove the USB memory device, do not power off the instrument or press any key. If the update 

process fails, please report the problem to your distributor or our technical support.

4. Once the upgrade is completed, the instrument will automatically restart

5.19.1.3  [Option]

Enter option TG or EMI function configuration.

5.19.1.4  [Return]

Return to the previous menu.

Summary of Contents for MP700852















































Reviews:

No comments

Brands by name

Popular brands

Load more brands