Page <25>
V1.0
07/01/22
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
sg.element14.com/b/multicomp-pro
1) [Network Meas On Off]
Turn on or off the tracking source network measurement function. Tracking source network measurement function, mainly for
amplitude and frequency characteristics measurement; RF output and spectrum measurement is fully synchronized, can be
used as a scalar network analyzer. When the network measurement function is “on”, the measurement results show relative
values after “normalized”, expressed in “dB”. When the network measurement function is “off”, the measurement shows the
spectrum measurement result, expressed in “dBm”.
2) [Output Level]
Used to set the output power of the trace source.
3) [Ref Level]
This soft menu is used to track the source network measurement of the user to adjust the measurement results display
location.
4) [Position]
Used to set the position during network measurement.
5) [Execute Norm]
This soft menu is used to track the user’s field calibration of the source network measurements. After connecting the
instrument’s RF output to the RF input, press the “normalized” soft menu and the display shows a straight line on the 0dB
scale.
6) [Normalize On Off]
This soft-menu is used to turn normalization on or off after executing normalization.
7) [Return]
Return to the previous menu.
5.12 [Demod] Demodulation
Enter the demodulation settings, the spectrum analyzer supports audio demodulation and analog demodulation.
5.12.1 [DEMOD►]
Enter Audio Demod soft menu.
5.12.1.1 [Demod On Off]
Turn audio demodulation on or off.
5.12.1.2 [Demod Mode►]
Enter the demodulation mode soft menu. Including FM, AM.
5.12.1.3 [Sound]
When the audio demodulation is on, adjust the speaker output volume.
5.12.1.4 [RadioSet►]
Quick access to the common broadcast band.
5.12.1.5 [Return]
Return to the previous menu.
5.12.2 [Analog Demod►]
Enter the digital demodulation soft menu.
5.12.2.1 [AM►]
Enter AM demodulation soft menu.
