Page <26>
V1.0
07/01/22
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
sg.element14.com/b/multicomp-pro
5.12.2.1.1 [AM On Off]
Turn AM demodulation On or Off.
5.12.2.1.2 [Carrier Freq]
Set the carrier frequency of the AM modulation signal.
5.12.2.1.3 [IF BW]
Set the demodulation bandwidth of the AM modulated signal.
5.12.2.1.4 [Data Reset]
Set the maximum, minimum, and average data reset under the AM modulated signal.
5.12.2.1.5 [Setup►]
Set the time axis, depth axis and AF trigger of AM modulation.
1) [Time Axis►]
Set the time axis parameters.
• [Ref.Value]
Set the starting reference time on the time axis.
•
[Position]
Set the reference position of the waveform on the time axis.
• [Scale/Div Auto Man]
Automatically or manually set the grid division scale.
• [Return]
Return to the previous menu.
2) [Depth Axis►]
Set the depth axis parameters.
• [Ref Depth]
Set the reference offset position as a vertical percentage.
•
[Position]
Set the reference position of the waveform on the depth axis.
• [Scale/Div Auto Man]
Automatically or manually set the grid division scale.
• [Return]
Return to the previous menu.
3) [AF Trigger►]
Set the AF triggering conditions.
• [AF Trigger On Off]
Set the AF trigger to be On or Off.
• [Edge Pos Neg]
Set the trigger to rising or falling edge.
•
[Trigger Mode]
Set the triggering mode to single trigger or continuously trigger.
