Page <13>
V1.0
07/01/22
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
sg.element14.com/b/multicomp-pro
Table 4-5 User interface Description
NO.
Name
Description
Related Key
1
Reference frequency
Set the reference frequency as Int
(internal) or Ext (external) input
FREQ
→ [Freq Ref]
2
Preamplifier
Turn on/off the preamplifier
AMPTD
→ [Preamplifier]
3
Sweep status
Set the sweep status to Single or
Cont (continuous)
[Sweep]→ [Sweep Single] or
[Sweep Cont]
4
Trigger type
Set the trigger type to Auto, Video,
Pos (external positive edge), Neg
(external negative edge)
[Trig]
5
Tracking generator
Show the source type as CW
(Continuous Wave) or TG (Tracking
Generator), press to turn on/off the
source output
[TG]→ [Source GEN]
6
LAN access sign
LAN access sign
7
Analog demodulation
Turn on analog demodulation
[Demod]→ [Analog Demod]
8
FFT mode
When RBW is set to less than 3kHz,
automatically switch to FFT mode
9
Automatic mode
Turn on automatic mode
[Auto]
10
Audio demodulation
Turn on audio demodulation
[Demod]→ [Demod]
11
Peak search
Turn on peak search
[Peak]→ [Cont Max]
12
Remote control
Turn on remote control
13
USB storage device
Show if USB storage device is
inserted;
14
UNCAL sign
Measurement is not calibrated
15
Date/time
Display system date and time
[System]→ [Date/Time]
16
Menu title
Function of current menu belongs
to.
17
Marker readout
Display frequency and amplitude of
current marker
[Marker]
18
Overflow sign
When the input signal exceeds the
ADC range, this sign will appear
19
Menu item
Menu item of current function
20
Sweep Time
System sweep time
[Sweep]→ [Sweep Time]
21
Span
Display span width
[SPAN]→[Span] or
[FREQ]→[Stop Freq]
22
Video bandwidth
Display video bandwidth
[BW]→ [VBW]
23
Center frequency
Display center frequency
[FREQ]→ [Center Freq] or
[Start Freq]
24
Resolution bandwidth
Display resolution bandwidth
[BW]→[RBW]
25
Marker
Display current activated marker
[Marker]
26
Trace average number
Continuously get average of the
trace to smooth it.
BW
→ [Average]
