Multi-Tech MultiModem ISDN MT128ISA-UV, User Manual

Page: 56 / 85

57
Chapter 2 - Installation
MT128ISA/PCI
SWITCH - Displays the ISDN Switch type you are using.
SPID 1: Displays SPID information for the first ISDN line.
SPID2: - Displays SPID information for the second ISDN line.
PTP Mode - Check the PTP box to enable Point to Point mode. The default for this field
is blank. If your telephone company specifies a TEI value, enter it in the TEI: field.
X.25 on DChannel - Check this field to enable X.25 on D channel service. Also specify
the TEI value. If X.25 Channel D is not available leave this field blank.
MSN List - Click on MSN List to add Multiple Subscriber Numbers for this device. Leave
this field blank if your ISDN provider does not use MSN services.
3. When you have completed configuration of this screen, click OK to return to the ISDNLink
Configuration screen (figure 4-48).
You are now ready to configure your NDISWAN ports.
1. From the ISDNLink Configuration screen, expand the NDISWAN Ports section and
highlight ISDNDevice-00. Click on Properties.
2. The ISDN Device-00-Setting screen displays as shown in figure 2-50.
Figure 2-50. Configure MSN, SAD and protocol options.
3. Enter the information provided by your telephone company into the appropriate fields.
4. If you want to use MLPPP (Multi-Link Point to Point Protocol) or MLPPP+BOD
(Bandwidth on Demand) for outgoing calls, check Enable Multilink PPP and click the
Advance button to display the screen shown in figure 2-51.
Figure 2-51. Setting up a Multi-Link connection