Multi-Tech MultiModem ISDN MT128ISA-UV, User Manual

Page: 50 / 85

51
Chapter 2 - Installation
MT128ISA/PCI
Figure 2-41. The Multi-Tech ISDN_MT 128 ISDN Device Properties display
5. Use the list box to select the correct Switch Type or D-Channel protocol. If you are not
sure which type you are using, check with your ISDN provider. Press Configure to
continue with the set up.
The following installation screen sequence will vary depending upon the switch type you
selected in the previous step.
If your switch type requires ISDN Phone Number and SPID information, screen similar
to figure 2-42 appears.
Figure 2-42. Configuring ISDN Phone Number and SPID Information
a. Highlight the first Channel and enter the Phone number and SPID information provided by
your ISDN service provider. If you have a second ISDN Channel, highlight Channel 2
and enter the Phone number and SPID information associated with it. Click OK when
you have completed the screen.
If the switch type you selected uses MSN (Multiple Subscriber Numbers) or SAD (sub-
addressing) you will see a screen similar to 2-43.
Figure 2-43. Configuring Multiple Subscriber Numbers