Multi-Tech MultiModem ISDN MT128ISA-UV, User Manual

Page: 32 / 85

33
Chapter 2 - Installation
MT128ISA/PCI
Windows 98 Installation and Configuration
Read the following installation steps to assist you in the setup and configuration of the
NDISWAN, virtual modem (VCOMM) and CAPI interfaces.
1. After installing the internal PC terminal adapter, switch the computer power on and allow
Windows 98 to start up. When the system starts it should auto-detect a new Plug-and-
Play card and request driver installation. Insert the Windows 98 ISDN driver diskette into
the appropriate disk drive. When prompted, select the ISDNND98.INF file from the
installation diskette. If the MultiModem ISDN terminal adapter has been installed
previously, the proper driver is ISDN98.INF. With either driver, Windows 98
automatically processes the necessary installation steps. Click Finish to complete the
installation.
2. After Windows 98 installs the driver, the ISDN Configuration Wizard automatically starts.
For most installations, the Automatic setting can be selected as the Switch protocol. If
you have connection problems, you will want to return to this screen and specify the
actual ISDN switch type as provided by your ISDN service provider. Enter your phone
numbers, SPIDs, MSNs and SADs as required in the fields provided (see Chapter 2
“Before You Begin” for more information about these values. Click Next>Finish, and
restart the system when prompted.
You may return to the ISDN Switch configuration if you need to verify or edit the information
by clicking Start>Settings>Control Panel>System>Device Manager. Expand the
ISDNLink section and double-click on the ISDN MT128 Adapter. Click on the Settings tab to
configure your Switch Type and phone line options.
Figure 2-22. ISDN Adapter Properties
If the MultiModem ISDN terminal adapter driver is installed by Windows 98, but the terminal
adapter does not function after the computer is rebooted, or error message dialogue boxes
appear, follow the instructions at the end of this section entitled “Windows 98 Removal of
ISDN Driver” . Repeat the installation procedure one more time before contacting technical
support.