Multi-Tech MultiModem ISDN MT128ISA-UV, User Manual

Page: 36 / 85

37
Chapter 2 - Installation
MT128ISA/PCI
1. Make a new connection by clicking
Start>Programs>Accessories>Communications>Dial-Up Networking. Double-click
Make New Connection and enter a descriptive name for this new connection. Select
the ISDN (Internet PPP, 64K) Adapter modem and click Configure. Verify the modem
connection is to ISDN ComPort1 or ISDN ComPort2. If not, change the port setting.
2. Click Next and enter the ISP or remote LAN telephone number to which you wish to
connect. Click Next, then Finish. A new connection icon appears in the Dial-Up
Networking window.
3. Right click on the new VCOMM 64K Access Dial-Up Networking connection and select
Properties. Click the Server Types tab. Ensure the correct settings for your ISP Server
Type and protocol have been selected. Click the TCP/IP Settings tab to specify Server
and DNS IP addresses if necessary (Contact your ISP or Network Administrator for
information about specific values to be entered within these fields).
4. Click OK to close the Dial-Up Networking properties window. You are now ready to make
a connection to your ISP and access the Internet through the Virtual Modem interface.
Double-click the icon for the Dial-Up Networking connection just created. Enter your user
name and password for your Internet Service Provider (ISP) account and click Connect.
The MultiModem ISDN terminal adapter connects in seconds.
Windows 98 Multilinked Channel Access (VCOMM)
Before attempting to make a 128K ML-PPP connection, first confirm that your ISP supports
this function.
This example uses Universal-1 and Universal-2 virtual modems for the128K MLP connection.
Verify the ISDN Universal-1 and ISDN Universal-2 adapters are installed using
Start>Settings>Control Panel>Modems. If the Universal adapters are not listed, you will
need to create a new definition for them.
1. To create a new definition, go to Start>Settings>Control Panel>Modem>Add. Select
Do Not Detect my modem. I will select it from a list >Next.
2. Click on Have Disk and browse to the location of the ISDN drivers supplied with your
terminal adapter. From the Models list, select the Universal-1 Adapter and associate it
with ISDN ComPort1. Click Next>Finish. Repeat the process to add Universal-2
Adapter and associate it with ISDN ComPort2. When complete, close the Modem dialog
box.
Once the Universal-1 and Universal-2 Adapters are available, you are ready to create a new
Dial-Up Connection for this connection.
1. Use Start>Programs>Accessories>Communications>Dial-Up Networking. Double
click Make New Connection. In the Select Device field, select the Universal-1 Modem
and associate it to the first ISDN COM port.
Next you will need to add an AT command to enable the Async to Sync PPP in ML PPP
mode.
2. Right click on the new dial-up connection icon and select Properties On the General
tab, click on Configure. Next, click on the Connection tab and select Advanced. In the
Extra Settings box, type the command ATB41. Click OK, OK, OK to return to the Dial-
Up Networking tab. This AT command must be added for both adapters.
3. If prompted, enter the area code and telephone number for your ISP.