Multi-Tech MultiModem ISDN MT128ISA-UV, User Manual

Page: 15 / 85

16
MultiModemISDN User Guide
MT128ISA/PCI
the adapter is firmly seated and the retaining bracket is flush with the computer chassis.
Fasten the bracket to the computer chassis with the screw removed in Step 2b.
2f. Replace the PC cover.
3. If you are using a voice model adapter (models MT128ISA-UV or MT128PCI-SV only)
you may connect your current analog device to the RJ-11 Phone port. You can connect
analog telephones, G3 fax, modem, or an answering machine with the RJ-11 connector
cable.
Figure2-4. Modular Analog and BRI Connections
4a. Make the ISDN connection by connecting the MT128PCI-SD/SV adapter and the NT1
with the RJ-45 cable connector, and insert the ISDN BRI line into the correct NT1 socket.
OR
4b. Insert the ISDN BRI line with the RJ-45 connector cable directly into the RJ-45 jack
(Line port) on the MT128ISA-UV adapter.
Your ISDN PC environment is ready for installation. The MT128PCI-SD/SV and adapters
attach to the ISDN T interface from the NT1. The MT128ISA-UV adapter attaches to the
ISDN U interface directly with ISDN switch.
RJ11 Analog Connection
(Telephone, G3 Fax, Answering Machine,
Modem or PBS Trunk)
RJ45 BRI Connection