Multi-Tech MultiModem ISDN MT128ISA-UV, User Manual

Page: 48 / 85

49
Chapter 2 - Installation
MT128ISA/PCI
Windows 2000 Installation and Configuration
Follow these instructions to setup and configure the MultiModem ISDN adapter for Windows
2000. The supported application interfaces for Windows 2000 include CAPI 2.0 and
NDISWAN. This driver provides for multi-card support in the same PC.
The MT128 driver files for Windows 2000 are located on the Windows 2000 installation
diskette in a self-extracting file. Although the Windows 2000 driver diskette is labeled
Version 2.52, the diskette contains the current Windows 2000 driver which is version 3.40.
1. To extract the files, place the Windows 2000 driver diskette in the A: drive.
2. Use Explorer to view the contents of the diskette in drive A.
3. Double Click on the MT128 self-extracting file icon.
4. The WinZip Self Extractor will display. The default installation folder is c:\MT128. If you
would prefer to extract the files to a different location, you may change the file path or
folder before extracting the files.
5. Click on UnZip to extract the files. The program will extract 12 files and requires 1.42 MB
of disk space.
After installing your ISDN card, switch the computer power on and allow Windows 2000 to
start up. When the Windows 2000 system starts it should auto-detect a new Plug-and-Play
adapter and request driver installation.
Figure 2-37. Installing the Windows 2000 ISDN drivers
1. Press Next to continue the installation.
Figure 2-38. Locating the driver files