Multi-Tech MultiModem ISDN MT128ISA-UV, User Manual

Page: 16 / 85

17
Chapter 2 - Installation
MT128ISA/PCI
Software Installation
Before You Begin
After installing the terminal adapter in your computer you’ll need to install and configure the
adapter drivers, then set up dial-up connections.
If you are using Windows 95 you will also need to install Microsoft DUN (Dial-UP Networking)
or the ISDN Accelerator Pack. If your ISDN application uses the CAPI interface you will want
to install a CAPI compliant application such as RVS-COM Lite (installation instructions are
included in Appendix C of this User Guide).
Before you can configure your software you need to determine how you plan to use your
ISDN adapter. The MultiModem ISDN terminal adapter uses three basic APIs which are
further described in Appendix B of this manual. In general:
• NDISWAN connections are used for connections to the Internet, a remote Local Area
Network or for RAS installations. Upon installing NDISWAN the following adapters and
protocols are installed on your system:
•IINWAN95-ISDN Adapter
•NDISWAN-IINWAN95-ISDN Adapter
• VCOMM or the Virtual Modem is used for ISDN applications that do not use networking
protocols, (e.g., HyperTerminal or PCAnywhere).
•ISDN (Internet MLPPP over X.75, 128K) Adapter
•ISDN (Internet MLPPP+BOD over X.75, 128K) Adapter
•ISDN (Internet MLPPP, 128K) Adapter
•ISDN (Internet PPP over X.75, 64K) Adapter
•ISDN (Internet PPP, 64K) Adapter
•ISDN Universal-1 (64K) Adapter
•ISDN Universal-2 (64K) Adapter
• CAPI allows for such functions as faxing. You’ll need to install a CAPI compliant application
such as RVS-COM Lite to use this API. RVS-COM Lite installation is described in
Appendix C. Installing RVS-COM Lite will make the following modems available:
•RVS ISDN
•RVS ISDN Btx
•RVS ISDN Fax
•RVS ISDN HDLC transparent
•RVS ISDN Internet PPP
•RVS ISDN Minitel
•RVS ISDN Modem Analog
•RVS ISDN V.110
•RVS ISDN V.120
•RVS ISDN X.75 T.70NL
•RVS ISDN X.75 transparent