7.3.2 Crankcase breather – oil separator replacement
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Ethanol, denatured
Oil separator
(→ Spare Parts Catalog)
Crankcase breather – oil separator
replacement
1.
Loosen clamps (1), push rubber sleeves (2)
over tubes (3).
2.
Remove screws (4), take off oil separator,
clamps (7), washers (5) and spacer sleeves
(6).
3.
Loosen clamp (8), remove guide sleeve (9)
from oil separator by turning it.
4.
Coat O-ring in the new oil separator with
denatured ethanol.
5.
Press guide sleeve into new oil separator to
stop, tighten clamp.
6.
Insert guide sleeve into rubber sleeve.
7.
Mount oil separator, clamp, washer, spacer
sleeve and hex screw on holder, tighten on‐
ly lightly.
8.
Align oil separator, push remaining rubber
sleeves over the respective union and tight‐
en all clamps.
9.
Replace further oil separators in the same
way.
88 | Task Description | MS15021/01E 2012-02
TIM-ID: 0000003495 - 001
