manualshive.com logo in svg

MTU 8 V 4000 M40A, Operating Instructions Manual

Share
Download
MTU 8 V 4000 M40A Operating Instructions Manual Download Page 150

7.23 Accessories for (Electronic) Engine Governor / Control

System

7.23.1 Engine governor and connectors – Cleaning

Preconditions

☑ Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Connector pliers

0135315483

1

Isopropyl alcohol

X00058037

1

Cleaning engine governor and

connectors

1.

Remove heavy soiling from housing surface

with isopropyl alcohol.

2.

Remove dirt from surface of connectors (1),

connector sockets and shrink-formed com‐

ponents (2) using a cloth moistened with

isopropyl alcohol.

3.

Check legibility of cable labels. Clean or re‐

place illegible labels.

Cleaning heavily soiled connectors

on engine governor

1.

Use connector pliers (2) to disengage bayo‐

net union nut (4) and withdraw connector

(3).

2.

Clean connector housings, connector sock‐

et housings (1) and all contacts with iso‐

propyl alcohol.

3.

When connectors, sockets and all contacts

are dry: Fit connectors and check engine

governor plug connections (→ Page 153).

150 | Task Description | MS15021/01E 2012-02

TIM-ID: 0000000948 - 009

Summary of Contents for 8 V 4000 M40A











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands