manualshive.com logo in svg

MTU 8 V 4000 M40A, Operating Instructions Manual

Share
Download
MTU 8 V 4000 M40A Operating Instructions Manual Download Page 132

7.16.5 Engine coolant – Filling

Preconditions

☑ Engine is stopped and starting disabled.
☑ MTU Fluids and Lubricants Specifications (A001061/..) are available.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Engine coolant

WARNING

Coolant is hot and under pressure.

Risk of injury and scalding!

• Let the engine cool down.

• Wear protective clothing, gloves, and goggles / safety mask.

CAUTION

Cold coolant in hot engine can cause thermal stress.

Formation of cracks in components!

• Fill / top up coolant only into cold engine.

Preparatory steps

1.

Turn breather valve of coolant expansion

tank counterclockwise to first stop and allow

pressure to escape.

2.

Continue to turn breather valve counter‐

clockwise and remove.

3.

Release the coolant line union on both tur‐

bochargers (→ Page 128).

4.

Release the coolant line union at the cool‐

ant distributor (→ Page 128).

132 | Task Description | MS15021/01E 2012-02

TIM-ID: 0000006727 - 004

Summary of Contents for 8 V 4000 M40A











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands