7.14.2 Engine oil – Change
Preconditions
☑ Engine is stopped and starting disabled.
☑ Engine is at operating temperature.
☑ MTU fluids and lubricants specifications (A001061/..) are available.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Torque wrench, 40-200 Nm
F30027337
1
Ratchet adapter
F30027341
1
Engine oil
Sealing ring
(→ Spare Parts Catalog)
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Version without semirotary hand pump: Drain the engine oil through the drain plug(s)
on the oil pan.
1.
Provide a suitable container in which to collect the engine oil.
2.
Remove drain plug(s) and drain engine oil.
3.
Install drain plug(s) with new sealing ring.
Version with semirotary hand pump: Extracting the engine oil
1.
Provide a suitable container in which to collect the engine oil.
2.
Extract all engine oil from oil pan using the semirotary hand pump.
Draining residual oil from
equipment carrier (only with
unscheduled engine oil change)
1.
Provide a suitable container in which to col‐
lect the engine oil.
2.
Remove drain plug (1) and drain engine oil
from engine oil heat exchanger and from
engine oil filter.
3.
Remove drain plugs (2) and (3) and drain
engine oil.
4.
Replace engine oil filter (→ Page 124).
5.
Install drain plug(s) with new sealing ring.
MS15021/01E 2012-02 | Task Description | 121
TIM-ID: 0000000930 - 007
