manualshive.com logo in svg

MTU 20 V 4000 C22, Operating Instructions Manual

Share
Download
MTU 20 V 4000 C22 Operating Instructions Manual Download Page 98

7.14 Oil Filtration / Cooling

7.14.1 Automatic oil filter – Filter candles replacement

Preconditions

☑ Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Grease (Kluthe Hakuform 30-10/Emulgier)

X00029933

1

Engine oil
O-ring

(→ Spare Parts Catalog)

Oil filter candles

(→ Spare Parts Catalog)

WARNING

Hot oil.

Oil can contain combustion residues which are harmful to health.

Risk of injury and poisoning!

• Wear protective clothing, gloves, and goggles / safety mask.

• Avoid contact with skin.

• Do not inhale oil vapor.

CAUTION

Contamination of components.

Damage to component!

• Observe manufacturer's instructions.

• Check components for special cleanness.

98 | Task Description | M015675/05E 2011-10

TIM-ID: 0000006401 - 002

Summary of Contents for 20 V 4000 C22












































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands