manualshive.com logo in svg

MTU 20 V 4000 C22, Operating Instructions Manual

Share
Download
MTU 20 V 4000 C22 Operating Instructions Manual Download Page 87

7.9.2 Edge-type fuel filter – Draining

Preconditions

☑ Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Diesel fuel
Sealing ring

(→ Spare Parts Catalog)

WARNING

Fuels are combustible.

Risk of fire and explosion!

• Avoid open flames, electrical sparks and ignition sources.

• Do not smoke.

Edge-type fuel filter – Draining

1.

Rotate edge-type filter (2) with handle (1)

clockwise several times.

2.

Do not apply force when rotating handle.

3.

Close fuel supply.

4.

Remove drain plug (3) from edge-type filter

(2).

5.

Drain water and contaminants through drain

plug opening (3) until pure fuel emerges

from filter.

6.

Fit drain plug (3) with new sealing ring and

screw in.

7.

Open fuel supply.

M015675/05E 2011-10 | Task Description | 87

TIM-ID: 0000004952 - 001

Summary of Contents for 20 V 4000 C22












































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands