manualshive.com logo in svg

MTU 20 V 4000 C22, Operating Instructions Manual

Share
Download
MTU 20 V 4000 C22 Operating Instructions Manual Download Page 35

4.3 Engine – Start in manual mode

Preconditions

☑ Engine with no load.
☑ External start interlock is not activated.

DANGER

Unguarded rotating and moving engine components.

Risk of serious injury – danger to life!

• Before barring or starting the engine, make sure that nobody is in the danger zone.

WARNING

Engine noise above 85 dB (A).

Risk of damage to hearing!

• Wear ear protectors.

Preparation

Item

Measure

Operating mode switch (if

applicable)

Switch to manual mode.

Coolant preheating unit (if

applicable).

Switch on.

Starting the engine

Item

Measure

Switch cabinet, operator

station etc. (depending on

manufacturer).

If coolant temperature is

• > 40 °C (with coolant preheating unit, if applicable)

press start button.

• Automatic starting sequence is executed

• Engine speed display instrument indicates increasing speed

• After the starting sequence is completed, engine is running at idle

speed.

M015675/05E 2011-10 | Operation | 35

TIM-ID: 0000002233 - 003

Summary of Contents for 20 V 4000 C22












































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands