MTU 20 V 4000 C22 Operating Instructions Manual Download Page 103

Page: 103 / 139

7.14.3 Centrifugal oil filter – Cleaning and filter-sleeve replacement

Preconditions

☑ Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Torque wrench, 6-50 Nm

F30027336

Cold cleaner (Hakutex 60)

X00056750

Filter sleeve

(→ Spare Parts Catalog)

Sealing ring

(→ Spare Parts Catalog)

Sealing ring

(→ Spare Parts Catalog)

WARNING

Hot oil.

Oil can contain combustion residues which are harmful to health.

Risk of injury and poisoning!

• Wear protective clothing, gloves, and goggles / safety mask.

• Avoid contact with skin.

• Do not inhale oil vapor.

WARNING

Compressed air

Risk of injury!

• Do not direct compressed-air jet at persons.

• Wear protective goggles / safety mask and ear protectors.

M015675/05E 2011-10 | Task Description | 103

TIM-ID: 0000000934 - 007

Summary of Contents for 20 V 4000 C22












































































































































Search results

Summary of Contents for 20 V 4000 C22

Reviews:

Brands by name

Popular brands

MTU 20 V 4000 C22, Operating Instructions Manual

Search results

Summary of Contents for 20 V 4000 C22

Reviews:

Brands by name

Popular brands