manualshive.com logo in svg

MTU 20 V 4000 C22, Operating Instructions Manual

Share
Download
MTU 20 V 4000 C22 Operating Instructions Manual Download Page 65

7.3.2 Crankcase breather – Cleaning

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Cleaner (Snow-White 11-0)

40460

1

Cleaner (Hakupur 312)

30390

1

WARNING

Compressed air

Risk of injury!

• Do not direct compressed-air jet at persons.

• Wear protective goggles / safety mask and ear protectors.

WARNING

Cleaner is extremely caustic.

Risk of injury and suffocation!

• Avoid contact with eyes and skin.

• Do not inhale vapors and smoke.

• Do not eat, drink, smoke when working with cleaner.

• Wear protective clothing, gloves, and goggles / safety mask.

• Take measures against electrostatic charging.

CAUTION

Excessive reaction time of cleaning agents on components.

Damage to component!

• Observe manufacturer's instructions.

• Wear protective clothing, gloves, and goggles / safety mask.

Crankcase breather – Cleaning

Note:

Protect rubber and synthetic components from oil and fuel, never treat with organic detergents. Wipe with

a dry cloth only.

1.

Clean all metallic parts with cleaner (Snow-White 11-0), then rinse with cleaner (Hakupur 312).

2.

Blow down all parts with compressed air.

M015675/05E 2011-10 | Task Description | 65

TIM-ID: 0000003510 - 003

Summary of Contents for 20 V 4000 C22












































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands