manualshive.com logo in svg

MTU 20 V 4000 C22, Operating Instructions Manual

Share
Download
MTU 20 V 4000 C22 Operating Instructions Manual Download Page 90

7.11 Air Filter

7.11.1 Air filter element and dust bowl – Cleaning

Preconditions

☑ Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Seal

(→ Spare Parts Catalog)

WARNING

Compressed air

Risk of injury!

• Do not direct compressed-air jet at persons.

• Wear protective goggles / safety mask and ear protectors.

Air filter element – Cleaning

Note:

Clean paper filter element dry only.

1.

Open air filter and remove filter element

(→ Page 93).

2.

Check seal for damage and cleanness, re‐

place if necessary.

3.

Clean all mating and sealing surfaces.

Note:

Debris particles must not enter the intake

system.

4.

Clean dust bowl.

5.

Blow out filter element with compressed air

(max. 3 bar) from inside until all dust has

been removed.

6.

Fit new filter element if old one is heavily

contaminated or damaged (→ Page 92).

90 | Task Description | M015675/05E 2011-10

TIM-ID: 0000005423 - 002

Summary of Contents for 20 V 4000 C22












































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands