manualshive.com logo in svg

MTU 20 V 4000 C22, Operating Instructions Manual

Share
Download
MTU 20 V 4000 C22 Operating Instructions Manual Download Page 101

7.14.2 Oil indicator filter – Check

Preconditions

☑ Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Strainer

(→ Spare Parts Catalog)

Square-section ring

(→ Spare Parts Catalog)

O-ring

(→ Spare Parts Catalog)

WARNING

Hot oil.

Oil can contain combustion residues which are harmful to health.

Risk of injury and poisoning!

• Wear protective clothing, gloves, and goggles / safety mask.

• Avoid contact with skin.

• Do not inhale oil vapor.

WARNING

Compressed air

Risk of injury!

• Do not direct compressed-air jet at persons.

• Wear protective goggles / safety mask and ear protectors.

CAUTION

Unsuitable cleaning tool.

Damage to component!

• Observe manufacturer's instructions.

• Use appropriate cleaning tool.

Removing strainer

1.

Clean oil indicator filter before disassem‐

bling it.

2.

Remove screws (1).

3.

Take off cover (2) with O–ring (3).

4.

Take strainer (5) from filter housing.

M015675/05E 2011-10 | Task Description | 101

TIM-ID: 0000006402 - 001

Summary of Contents for 20 V 4000 C22












































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands