Checking diaphragm
1.
Remove cover (4).
2.
Remove spring (5), seal (2) and dia-
phragm (3).
3.
Check diaphragm (3) for damage, fit new dia-
phragm if used one is damaged.
4.
Install diaphragm (3) on housing (1).
5.
Install new seal (2) and spring (5) together
with cover (4).
6.
Use torque wrench to tighten the screws of cover (4) to the specified torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
Tightening torque
6 Nm +2 Nm
7.
Check diaphragms in further oil separators in the same way.
72 | Task Description | MW15409/04E 2015-08
TIM-ID: 0000003491 - 005
Summary of Contents for 12V2000M91
Page 1: ...Operating Instructions Diesel Engine 12V2000M91 16V2000M91 MW15409 04E...
Page 23: ...MW15409 04E 2015 08 General Information 23 TIM ID 0000002178 006...
Page 24: ...Lube oil system covers 24 General Information MW15409 04E 2015 08 TIM ID 0000002178 006...
Page 25: ...MW15409 04E 2015 08 General Information 25 TIM ID 0000002178 006...
