8.18 Raw Water Pump with Connections
8.18.1 Raw water pump – Priming
Preconditions
☑
Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Sealing ring
(→ Spare Parts Catalog)
Raw water pump – Priming
Note:
To prevent the raw water pump from running
dry and being damaged and to ensure proper
intake performance, the pump must be filled
with 3 to 4 liters of water in the following cas-
es:
• Before initial operation.
• Following repair /maintenance work or
pump exchange
• After extended out-of-service period (to
compensate for evaporation loss or water
drained off from the system during winter
lay-up periods).
1.
Remove plug screw (1) on raw water elbow
(3).
2.
Fill 3 to 4 liters of water into the system
through the opening.
3.
Install plug screw (1) with new sealing ring (2)
and tighten.
MW15409/04E 2015-08
| Task Description | 135
TIM-ID: 0000041580 - 001
Summary of Contents for 12V2000M91
Page 1: ...Operating Instructions Diesel Engine 12V2000M91 16V2000M91 MW15409 04E...
Page 23: ...MW15409 04E 2015 08 General Information 23 TIM ID 0000002178 006...
Page 24: ...Lube oil system covers 24 General Information MW15409 04E 2015 08 TIM ID 0000002178 006...
Page 25: ...MW15409 04E 2015 08 General Information 25 TIM ID 0000002178 006...
