2 Transport
2.1 Transportation
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Crossbeam
T80092210
1
DANGER
Suspended load
Danger to life
• Never stand under suspended loads!
• Wear appropriate personal protective equipment.
Transportation
1.
Install the engine mount locking screws prior to transportation.
2.
Use the lifting eyes provided to transport the engine.
3.
Use suitable transport and lifting gear only.
4.
Transport the engine in the installation position only. Max. admissible diagonal pull 10°.
5.
Do not place unsecured parts on the engine.
6.
Raise and lower the engine slowly. Do not allow hoist slings or chains to contact the engine or any of its
component parts. Readjust lifting gear as necessary.
7.
For special packaging with aluminum foil: Suspend the engine by the lifting eyes on the bearing pedestal or
transport by means of handling equipment (forklift truck) capable of bearing the load.
8.
Secure the engine against tilting during transportation. Secure such as to preclude slipping and tipping when
driving up or down inclines and ramps.
Setting down after transport
1.
Set the system down on a firm, flat surface only.
2.
Make sure that the consistency and load-bearing capacity of the ground or support surface is adequate.
3.
Never set the engine down on its oil pan unless expressly authorized to do so by MTU.
MW15409/04E 2015-08
| Transport | 15
TIM-ID: 0000064510 - 001
Summary of Contents for 12V2000M91
Page 1: ...Operating Instructions Diesel Engine 12V2000M91 16V2000M91 MW15409 04E...
Page 23: ...MW15409 04E 2015 08 General Information 23 TIM ID 0000002178 006...
Page 24: ...Lube oil system covers 24 General Information MW15409 04E 2015 08 TIM ID 0000002178 006...
Page 25: ...MW15409 04E 2015 08 General Information 25 TIM ID 0000002178 006...
