8.24.6 Engine control system – Removal and installation
Preconditions
☑
Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Connector pliers
F30017884
1
Caps for Cannon sockets
Removing engine control sys-
tem from engine
1.
Note or mark assignment of cables to con-
nector sockets.
2.
Use connector pliers (2) to release the bayo-
net union nuts (4) of the connectors (3) by
turning them counterclockwise.
3.
Remove all connectors.
4.
Close connector sockets with appropriate
caps (1).
5.
Disconnect ground strap from engine control
system grounding stud (7).
6.
If the screws (4) are easily accessible:
1. Unscrew screws (4).
2. Remove engine control system hous-
ing (3) from mounting brackets (2).
3. Unscrew mounting brackets (2), cable
shock absorbers (5) and further securing
parts (6) as one unit from engine.
7.
If the screws (4) are not easily accessible:
1. Remove screws (1).
2. Remove engine control system hous-
ing (3) together with mounting brack-
ets (2).
3. Unscrew cable shock absorbers (5) and
further securing parts (6) as one unit
from engine.
Installing engine control system on engine
1.
Install in reverse order. Ensure correct assignment of plugs and sockets.
2.
Use connector pliers to turn the bayonet union nuts of the connectors clockwise until they lock into place.
MW15409/04E 2015-08
| Task Description | 149
TIM-ID: 0000008487 - 006
Summary of Contents for 12V2000M91
Page 1: ...Operating Instructions Diesel Engine 12V2000M91 16V2000M91 MW15409 04E...
Page 23: ...MW15409 04E 2015 08 General Information 23 TIM ID 0000002178 006...
Page 24: ...Lube oil system covers 24 General Information MW15409 04E 2015 08 TIM ID 0000002178 006...
Page 25: ...MW15409 04E 2015 08 General Information 25 TIM ID 0000002178 006...
