8.25.3 LOP – Test procedures
Preconditions
☑
Engine is stopped and starting disabled.
Preparatory steps
1.
Connect battery in accordance with battery
manufacturer's instructions.
2.
Switch master power switch to ON.
3.
Switch on engine management system
ECS-5.
Result:
• LOCAL OPERATION button (1) is illuminat-
ed brightly (local control mode is active).
• COUPLING NEUTRAL button (2) is illumi-
nated brightly (gearbox disengaged).
Switching between local and re-
mote control mode
1.
Press LOCAL OPERATION illuminated push-
button (1).
Result:
• LOCAL OPERATION button (1) flashes: Set-
ting does not correspond with feedback
signal from ECU and GCU.
• LOCAL OPERATION button (1) is illuminat-
ed at basic brightness: Remote control
mode is active.
2.
Press LOCAL OPERATION illuminated push-
button (1) again.
Result:
LOCAL OPERATION button (1) is illuminated
brightly (local control mode is active).
MW15409/04E 2015-08
| Task Description | 153
TIM-ID: 0000008873 - 003
Summary of Contents for 12V2000M91
Page 1: ...Operating Instructions Diesel Engine 12V2000M91 16V2000M91 MW15409 04E...
Page 23: ...MW15409 04E 2015 08 General Information 23 TIM ID 0000002178 006...
Page 24: ...Lube oil system covers 24 General Information MW15409 04E 2015 08 TIM ID 0000002178 006...
Page 25: ...MW15409 04E 2015 08 General Information 25 TIM ID 0000002178 006...
