8.25.2 LOP – Visual inspection
Preconditions
☑
Engine is stopped and starting disabled.
Preparatory steps
1.
If READY FOR OPERATION illuminated pushbutton is illuminated brightly, press switch briefly.
Result:
READY FOR OPERATION illuminated pushbutton returns to basic brightness.
2.
Switch master power switch to OFF.
3.
Disconnect battery in accordance with battery manufacturer's instructions.
Checking housing and internal
assemblies for secure seating
1.
Open LOP front door.
2.
Check securing screws (1, 4, 5, 7) for firm
seating. Tighten loose threaded connections.
3.
Check internal assemblies for firm seating,
this applies in particular to printed circuit
board (2) and PIMs (3, 6). Tighten loose
threaded connections.
4.
Close LOP front door.
Checking plug connections
1.
Check all connected cables to verify that the
two securing elements (1) are engaged on
the lugs (2) so that the respective male con-
nector (3) is held firmly in place in the socket.
2.
If this is not the case, press the securing ele-
ments (1) concerned in the direction of the
arrow until they can be felt to engage.
MW15409/04E 2015-08
| Task Description | 151
TIM-ID: 0000008868 - 007
Summary of Contents for 12V2000M91
Page 1: ...Operating Instructions Diesel Engine 12V2000M91 16V2000M91 MW15409 04E...
Page 23: ...MW15409 04E 2015 08 General Information 23 TIM ID 0000002178 006...
Page 24: ...Lube oil system covers 24 General Information MW15409 04E 2015 08 TIM ID 0000002178 006...
Page 25: ...MW15409 04E 2015 08 General Information 25 TIM ID 0000002178 006...
