8.15 Lube Oil System, Lube Oil Circuit
8.15.1 Engine oil – Level check
Preconditions
☑
Engine is stopped and starting disabled.
Checking oil level prior to en-
gine start
1.
Withdraw oil dipstick from guide tube and
wipe it.
2.
Insert oil dipstick into guide tube up to the
stop, withdraw after approx. 10 seconds and
check oil level.
3.
Oil level must be between “min.” and “max.”
marks.
Result:
If there is no mark, mark the oil dipstick
(→ Page 118).
4.
If necessary, top up to "max." mark
(→ Page 117).
5.
Insert oil dipstick into guide tube up to the
stop.
Checking oil level after the engine is stopped
1.
5 minutes after stopping the engine, remove oil dipstick from the guide tube and wipe it.
2.
Insert oil dipstick into guide tube up to the stop, withdraw after approx. 10 seconds and check oil level.
3.
Oil level must be between “min.” and “max.” marks.
Result:
If there is no mark, mark the oil dipstick (→ Page 118).
4.
If necessary, top up to "max." mark (→ Page 117).
5.
Insert oil dipstick into guide tube up to the stop.
116 | Task Description | MW15409/04E 2015-08
TIM-ID: 0000006165 - 003
Summary of Contents for 12V2000M91
Page 1: ...Operating Instructions Diesel Engine 12V2000M91 16V2000M91 MW15409 04E...
Page 23: ...MW15409 04E 2015 08 General Information 23 TIM ID 0000002178 006...
Page 24: ...Lube oil system covers 24 General Information MW15409 04E 2015 08 TIM ID 0000002178 006...
Page 25: ...MW15409 04E 2015 08 General Information 25 TIM ID 0000002178 006...
