026 – HI P-Diff-Lube Oil
ZKP-Number:
Red alarm. Engine shutdown.
Associated parameter 2.0154.932
Cause
Corrective action
Pressure loss via oil filter too
high (limit value 2).
1. Replace oil filter (→ Page 159).
2. If this fault message occurs again after unexpectedly short filter
runtime, check oil filter for deposits, change oil if required
(→ Page 157).
030 – SS Engine Overspeed
ZKP-Number:
Red alarm. Engine shutdown.
Associated parameter 2.2510.932
Cause
Corrective action
Engine overspeed (limit value 2).
This usually fault message
usually follows other fault
messages.
1. Check governor.
2. Check throttle closing position.
031 – HI ETC1 Overspeed
ZKP-Number:
Yellow alarm.
Associated parameter 2.3011.931
Cause
Corrective action
Speed of primary turbocharger
too high (limit value 1).
u
Turbocharger speed sensor is not fitted at present. Check ECU
setting for this input.
032 – SS ETC1 Overspeed
ZKP-Number:
Red alarm. Engine shutdown.
Associated parameter 2.3012.932
Cause
Corrective action
Speed of primary turbocharger
too high (limit value 2).
u
Turbocharger speed sensor is not fitted at present. Check ECU
setting for this input.
104 | Troubleshooting | MS150033/04E 2012-07
TIM-ID: 0000017544 - 001
