10.2 Technical data Temposonics R-Series
V
RH5
tp t
Interface
PROFINET RT
PROFINET IRT version 2.3
Data protocol
0763URğOHDQG(QFRGHU3URğOH9
Data transmission rate
100 MBit/s (maximum)
Measured value
Position, velocity/option: Simultaneous multi-position and multi-velocity measurements up to 30 magnets
as r
nt para
t rs
Resolution: Position
0.5…100
μ
m (selectable)
Cycle time
Stroke length
≤ 50 mm
≤ 715 mm
≤ 2000 mm
≤ 4675 mm
≤ 7620 mm
Cycle time
250 μs
500 μs
1000 μs
2000 μs
4000 μs
Linearity deviation
Stroke length
≤ 500 mm
> 500 mm
Linearity deviation
≤ ±50 μm
< 0.01 % F.S.
Optional internal linearization
/LQHDULW\WROHUDQFHDSSOLHVIRUWKHğUVWPDJQHWIRUPXOWLSRVLWLRQPHDVXUHPHQW
Stroke length
25…300 mm
300…600 mm
600…1200 mm
typical
± 15 μm
± 20 μm
± 25 μm
maximum
± 25 μm
± 30 μm
± 50 μm
Repeatability
< ±0.001 % F.S. (minimum ±2.5 μm) typical
Hysteresis
< 4
μ
m typical
Temperature coefficient
< 15 ppm/K typical
p ratin onditions
Operating temperature
ũĽŹ&ũĽŹ)
Humidity
90 % relative humidity, no condensation
Ingress protection
IP67
FRQQHFWRUVFRUUHFWO\ğWWHG
Shock test
150 g/11 ms, IEC standard 60068-2-27
Vibration test
30 g/10…2000 Hz, IEC 60068-2-6 (excluding resonant frequencies) /
RH5-J: 15 g/10…2000 Hz, IEC standard 60068-2-6 (excluding resonant frequencies)
EMC test
Electromagnetic emission according to EN 61000-6-3
Electromagnetic immunity according to EN 61000-6-2
The sensor meets the requirements of the EC directives and is marked with
Operating pressure
350 bar (5,076 psi)/700 bar (10,153 psi) peak (at 10 × 1 min) for sensor rod
/
RH5-J: 800 bar (11,603 psi)
Magnet movement velocity
Any
si n
at ria
Sensor electronics housing
Aluminum (painted), zinc die cast
Sensor flange
Stainless steel 1.4305 (AISI 303)
Sensor rod
Stainless steel 1.4306 (AISI 304L)/RH5-J: Stainless steel 1.4301 (AISI 304)
Stroke length
25…7620 mm (1…300 in.)/RH5-J: 25…5900 mm (1…232 in.)
ani a o ntin
Mounting position
Any
Mounting instruction
Please consult the technical drawings on
page 10
E
tri a onn
tion
Connection type
2 × M12 female connectors (D-coded), 1 × M12 male connector (A-coded)
2 × M12 female connectors (D-coded), 1 × M8 male connector
Operating voltage
+12…30 VDC
±
20 % (9.6…36 VDC)
Power consumption
Less than 4 W typical
Dielectric strength
500 VDC (DC ground to machine ground)
Polarity protection
8SWRũ9'&
Overvoltage protection
Up to 36 VDC
5/
With position magnet # 251 416-2
Temposonics
®
R-Series
V
PROFINET IO RT & IRT
Operation Manual
I 38 I
