45
Control Module (ADSU) (Version with Integrated Electronics only)
GB
G1 Integrated SCBA System
9.6
ID Tagging
The G1 was designed to allow the user to tag the SCBA during the use of the product.
The G1 Control Module also allows the user to tag the SCBA while the unit is turned off.
(1) Press and hold the RESET button until the RFID symbol
appears.
(2) Place the ID Tag on the user side of the backplate, on the
left side of the power module.
a) The control module will display the ID tag information
and beep once complete.
(3) If the control module does not display the ID tag informa-
tion, repeat steps 1 and 2.
(1) Press and hold BOTH green RESET buttons at the same
time until the RFID symbol appears.
(2) When the battery icon is displayed on the screen, press
the ALARM button and RFID symbol will appear.
