MS ENERGY ATOM a1, Instruction Manuals

Page: 83 / 124

ENG
4
1. IMPORTANT SAFETY INSTRUCTIONS
1.
Before carefully reading the Manual and understanding the
performance of the electric bike, do not use the electric bike, and
do not lend it to the persons who can manipulate the electric bike.
RIDING
2.
Do not pedal or move the bicycle while the battery charger is
connected. If you do, it may cause the power cable to become
entangled in the pedals, which may damage the battery charger,
the power cable and/or the charging port.
3.
Do not ride the bicycle if there is a fault with the battery or any
component of the pedal assistance system. Otherwise you may lose
control and suffer serious injury.
4.
Do not start moving with one foot on a pedal and the other on the
ground and then start riding the bicycle when you have reached a
certain speed. Otherwise you may lose control and suffer serious
injury. You should only start moving when you are properly seated
on the bicycle seat.
5.
Do not activate the throttle function if the back wheel is not
touching the ground. Otherwise, the wheel will rotate in the air at
high speed and may cause injury.
6.
Be sure to check the remaining battery capacity
before riding at night. The light powered by the
battery pack will go off soon after the remaining
battery capacity decreases to the point where riding
with assisted power is no longer possible. Riding without a light may
increase the risk of injury.
7.
Do not modify or remove any parts of the pedal assistance system.
Do not install non‐original parts or accessories. If you do, they may
damage the product, cause a fault or increase the risk of being
injured.
8.
When you stop, make sure that you apply the front and rear brakes
and keep your feet on the ground. Leaving one foot on a pedal when
stationary could accidentally activate the assisted power function,
which could cause you to lose control and suffer serious injury.
9.
Preparations before riding
: wear your helmet, gloves and other