MS ENERGY ATOM a1, Instruction Manuals

Page: 112 / 124

ENG
33
Table of regular inspection and maintenance
Note : the above table is for general reference, and an appropriate maintenance
cycle should be shortened or extended based on the working environment, using
frequency, the quality and new old rate of electric bike and other conditions;
8 Riding technology
A correct cycling posture is the mother to safety: the riding posture is
determined by the position of figure and shadow of the contact point
(handlebar, seat, Pedal) of the bicyclist and bicycle. However the posture is
closely related to the height and size of the bicyclist. So a single‐bicycle cycling
posture not only determines the efficiency of muscle contraction movement,
but at the same time determines whether the bicyclist can manipulate the
handlebar and brake safely. Therefore, a correct cycling position is the mother
to safety. The safe cycling techniques are described one by one in the following:
Adjust
Check or Clean,
Replace
Replace Wind
Lubricate
Inspection Item
First
purch‐
aise
60 days 180 days 360 days 540 days 720 days
1
．
Is the height of the handle seat proper
2
．
Are the handle and steering parts
worn
3
．
Is the chain too loose
4
．
Is the brake too flexible
5
．
Is the brake shoe block worn
6
．
Is the Rim biased or deformed
7
．
Is the spoke bent or loose
8
．
Do all bearing portions act flexibly