MS ENERGY ATOM a1, Instruction Manuals

Page: 95 / 124

ENG
16
Installation of front wheel
1. Take out the front wheel, and
loosen the nut and hook on the
front wheel axis;
2. Remove the black plastic rack
below the Front fork, and place the
front wheel axis into the Front fork
contact pin;
3. Turn the hook and nut (* front
fender stick) to the front wheel
axis, and tighten the nut with
15mm opening wrench by 18N.m
torque and install the protective cap
on the nut.
When fastening the front wheel nut
axis, press down the Front fork by force
so that the front wheel axis can work
closely with the Front fork.
Note : some models of front fender
sticks need to be installed on the front
wheel axis.
Installation of quick release front wheel and V brake *
1. Take out the front wheel, and rotate
the quick release handle for laps
counterclockwise.
2.
Remove the black plastic rack below
the Front fork, and take the V brake
conduit out of the V brake, and put
the front wheel axis into the Front
fork foot contact pin.
3. Rotate the quick release handle for
laps clockwise and lock the quick
release handle to ensure the front
wheel can not be loose;
4. Extrude the V brake by force, and put
the V brake conduit into the V brake.
2
3
1
2
3
4
1
1
2
3