MS ENERGY ATOM a1, Instruction Manuals

Page: 111 / 124

ENG
32
Adjustment method of damping (as shown): rotate toward the “+” direction to
increase the damping coefficient, thus increasing the damping hardness; rotate
toward the “‐” direction to reduce the damping coefficient thus decreasing the
damping hardness.
Rear rack
1 The largest load of the rear rack is 25Kg.
2 Do not adjust the rear rack arbitrarily, please consult the supplier to make
an adjustment if necessary.
3 Do not transport heavy objects; if a heavy object is put on the rear rack, the
bike’s steering performance will be affected and the braking performance
will be reduced, as will result in danger
7 Use and maintenance
Routine inspection of electric bike before use
1 Install the battery box in the slot of the battery box, open the power supply
switch and check whether the functions of all the electrical appliances are
normal.
2 Safety inspection (see the notes to safe use in the Manual)
3 Check whether the governor switch handle rotates and is reset flexibly.
4 Check whether the braking power‐off function and braking effect are in
good condition (dry braking distance 4m, wet braking distance 15m).
Everyday use and inspection of electric bike
In everyday use of the electric bike, a number of mechanical, electrical parts
will be worn, screws and other fasteners are also easy to loose and the
functions of the electrical appliances would be lost. If the occurrence of these
phenomena is not noted, it is prone to failure, and it is also prone to the risk
when cycling, so drivers must be responsible for inspection and maintenance in
peacetime.
Maintenance
In order to ensure traffic safety, from time to time, check whether all the
electrical appliances work properly, whether there is any lost wire and whether
mechanical parts are normal, and clean, wipe, oil the chain, fluted disc, flywheel
and Derailleur regularly (consult your supplier for the model of the oil product)
so as to maintain the normal function of each part at any time.