MS ENERGY ATOM a1, Instruction Manuals

Page: 93 / 124

ENG
14
Backlight Contrast setting
“bL” means backlight brightness. With level
1
being the dimmest and level
3
the brightest. The
default level is 1.
Press
or then modify the backlight
brightness and to confirm.
Connection layout
Following are the
standard connectors for
the display to connect to
the controller.
Display to controller
Display‐side waterproof
Controller‐side
waterproof
Line sequence table
Line Colour Function
1 Red (VCC) Power +
2 Blue (K) Switch
3 Black (GND) Ground
4 Green (RX) Received Data
5 Yellow (TX) Transmitted Data
Some cables use the water‐proof connector, users are not able to see the inside
colour in this case.
This manual is based off the general purpose software (V1.0).
As such some of the content may not be applicable due to software updates or
customisation