MS ENERGY ATOM a1, Instruction Manuals

Page: 97 / 124

ENG
18
① Disc brake plate
② Disc brake
③ Inner hexangular M6×16mm bolt
④ Brake block
⑤ Fixed hanger of the Disc brake
Note : when fixing the Disc brake bolt, drag the lower part of the Disc brake with
hand, and push the Disc brake upward as far as possible.
* Option, depends about brake type on your model
Installation of steering handle (Traking Bike)
1. Take out the Across handle Stems, remove the protective paper above the
Across handle Stems, and spin off four fixed screws on the Vertical handle
stems
2. Remove the top cover of the Vertical handle stems, fix the Across handle
Stems to the Vertical handle stems, and adjust the angle of the Across
handle Stems;
3. Tighten the top cover of
the Vertical handle stems
with the bolt by 6N.m
torque to ensure that the
up and down gap of the
top cover of the stand pipe
is even.
① Across handle Stems
② Top cover of Vertical
handle stems
③ Top cover bolt of
Vertical handle
④ 4mm hexagon spanner
Installation of steering handle (City Bike)
1. Take out the steering handle assembly, and remove the protective
paper above the Vertical handle stems;
2. Insert the Vertical handle stems inside the Front fork stand pipe, and
adjust the direction and insertion depth;
1
2
3
4