MRV Communications MRW55, User Manual

Page: 24 / 244

Introduction
1-6
1
Features and Benefits
• MRW55 Slave units support a 5 GHz point-to-point wireless link up 15.4 km (at
36 Mbps data rate) using integrated high-gain 17 dBi antennas
• MRW55M Master units support 5 GHz point-to-multipoint links using various
external antenna options
• Both MRW55 and MRW55M units also support access point services for the 5 GHz
and 2.4 GHz radios using various external antenna options
• Maximum data rate up to 108 Mbps on the 802.11a (5 GHz) radio
• Outdoor weatherproof design
• IEEE 802.11a and 802.11b/g compliant
• Local network connection via 10/100 Mbps Ethernet port
• Powered through its Ethernet cable connection to the power injector module
• Includes wall- and pole-mount brackets
• Security through 64/128/152-bit Wired Equivalent Protection (WEP) or 128-bit
Advanced Encryption Standard (AES) encryption
• Scans all available channels and selects the best channel and data rate based on
the signal-to-noise ratio
• Manageable through an easy-to-use web-browser interface, command line (via
Telnet), or SNMP network management tools
System Defaults
The following table lists some of the wireless bridge’s basic system defaults. To
reset the bridge defaults, use the CLI command “reset configuration” from the Exec
level prompt.
Feature Parameter Default
Identification System Name MRW55 Wireless Outdoor
Bridge/AP
Administration User Name admin
Password admin
General HTTP Server Enabled
HTTP Server Port 80
TCP/IP IP Address 192.168.1.1
Subnet Mask 255.255.255.0
Default Gateway 0.0.0.0
Primary DNS IP 0.0.0.0
Secondary DNS IP 0.0.0.0