MRV Communications MRW55, User Manual

Page: 80 / 244

System Configuration
6-22
6
CLI Commands for SNMP – Use the
snmp-server enable server
command from the
global configuration mode to enable SNMP. To set read/write and read-only
community names, use the
snmp-server community
command. The
snmp-server
host
command defines a trap receiver host. To view the current SNMP settings, use
the
show snmp
command.
MRW55(config)#snmp-server enable server 7-25
MRW55(config)#snmp-server community alpha rw 7-24
MRW55(config)#snmp-server community beta ro
MRW55(config)#snmp-server host 10.1.19.23 alpha
7-26
MRW55(config)#exit
MRW55#show snmp
7-27
SNMP Information
============================================
Service State : Enable
Community (ro) : ****
Community (rw) : *****
Location : building-1
Contact : Paul
Traps : Enabled
Host Name/IP : 10.1.19.23
Trap Community : *****
=============================================
MRW55#