MRV Communications MRW55, User Manual

Page: 43 / 244

Mount the Unit
4-3
4
Mounting on Larger Diameter Poles
In addition, there is a method for attaching the pole-mounting bracket to a pole that
is 2 to 5 inches in diameter using an adjustable steel band clamp (not included in the
kit). A steel band clamp up to 0.5 inch (1.27 cm) wide can be threaded through the
main part of the bracket to secure it to a larger diameter pole without using the
U-shaped part of the bracket. This method is illustrated in the following figure.
Using the Wall-Mounting Bracket
Perform the following steps to mount the unit to a wall using the wall-mounting
bracket:
Note: The wall-mounting bracket does not allow the wireless bridge’s intrgrated antenna
to be aligned. It is intended for use with the unit using an external antenna.
1. Always attach the bracket to a wall with the open end of the mounting grooves
facing up (see following figure).
Steel Band Clamp
Mounting Grooves