MRV Communications MRW55, User Manual

Page: 164 / 244

Command Line Interface
7-38
7
802.1x session-timeout
This command sets the time period after which a connected client must be
re-authenticated. Use the
no form to disable 802.1x re-authentication.
Syntax
802.1x session-timeout < seconds>
no 802.1x session-timeout
seconds - The number of seconds. (Range: 0-65535)
Default
0 (Disabled)
Command Mode
Global Configuration
Example
802.1x supplicant
This command sets the user name and password used for authentication of the
access point when operating as a 802.1x supplicant and enables supplicant
authentication. Use the
no form to disable the feature.
Syntax
802.1x supplicant eth_password < password >
802.1x supplicant eth_user < username >
802.1x supplicant wds_password < port > < password >
802.1x supplicant wds_user < port > < username >
802.1x supplicant <eth | wds port >
no 802.1x supplicant <eth | wds port >
• eth_password - Specifies a password for authentication using the Ethernet
port. (Range: 1-32 alphanumeric characters)
• eth_user - Specifies a username for authentication using the Ethernet port.
(Range: 1-32 alphanumeric characters)
• wds_password - Specifies a password for authentication using the
specified WDS port. (Range: 1-32 alphanumeric characters)
• wds_user - Specifies a username for authentication using the specified
WDS port. (Range: 1-32 alphanumeric characters)
• eth - Enables 802.1X supplicant authentication using the Ethernet port.
• wds - Enables 802.1X supplicant authentication using the specified WDS
port.
-
port - Specifies a WDS port number. (Range: 1-16 Master; 1 Slave)
MRW55#(config)#802.1x session-timeout 300
MRW55#(config)#