MRV Communications MRW55, User Manual

Page: 54 / 244

Initial Configuration
5-6
5
Auto Channel Select – Select Enable to automatically select an unoccupied
radio channel. (Default: Enable)
• 802.11b/g
802.11g Radio Channel: Set the operating radio channel number. (Range
1-11; Default: 1)
Note: Available channel settings are limited by local regulations which determine which
channels are available.
3. IP Configuration – Either enable or disable (Dynamic Host Configuration
Protocol (DHCP) for automatic IP configuration. If you disable DHCP, then
manually enter the IP address and subnet mask. If a management station exists
on another network segment, then you must enter the IP address for a gateway
that can route traffic between these segments. Then enter the IP address for
the primary and secondary Domain Name Servers (DNS) servers to be used for
host-name to IP address resolution.
DHCP Client – With DHCP Client enabled, the IP address, subnet mask and
default gateway can be dynamically assigned to the access point by the
network DHCP server. (Default: Enable)