MPE DP SERIES II, Operating And Service Manual

Page: 73 / 145

AC INPUT:
A: Phase A input.
B: Phase B input.
C: Phase C input.
GND: Earth ground.
DC OUTPUT:
VO+: Positive output.
VO- : Negative output.
COM: Midpoint of positive and negative output,
PROGRAMMING INPUTS AND OUTPUTS:
REF GND: Reference ground.
+10V REF: Reference for external analog control.
+2.5V REF CAL: Reference used for the calibration procedure.
: Remote positive voltage sense.
VO1REM-: Remote negative voltage sense.
VO2: Output monitoring voltage.
IO2: Output monitor current.
VREF: Voltage set point reference.
IREF: Current set point reference.
TVREF: Over voltage trip reference.
TIREF: Over current trip reference.
VMOD: Modulation input voltage.
60