MPE DP SERIES II, Operating And Service Manual

Page: 106 / 145

Command Syntax: *SRE <NR1>
Example: *SRE 20
Query Syntax: *SRE?
Return Parameter: <NR1> (Register value)
Related Commands: *ESE, *ESR
Table 4.6 SERVICE REQUEST ENABLE REGISTER
BIT POS. WEIGHT ABBREVIATION DESCRIPTION
0 1 NU Not Used
1 2 NU Not Used
2 4 NU Not Used
3 8 NU Not Used
4 16 MAV Message Available
5 32 ESB Event Status Bit
6 64 NU Not Used
7 128 NU Not Used
4.5.6 Read Model Number, Part Number, and Serial Number
This query requests the power supply to identify itself. It returns a string composed of three fields
separated by commas.
Query Syntax: *IDN?
Returned Parameters: Company Name, Power Supply Model, S/N (string format)
Example: Magna-Power Electronics, Inc., DPD16-900, S/N: 1163-0361, F/W:1.0
Related Commands: CALibrate:IDN (Refer to Section 4.3.9.1, Calibrate Subsystem, for
information on configuring the DP Series power supply.)
4.5.7 Save
This command stores the present state of the power supply at the specified location in memory.
Data can be saved in 100 memory locations. The following power supply parameters are stored by
*SAV:
VOLT[:LEV][:IMM]
CURR[:LEV][:IMM]
VOLT:PROT[:LEV]
93