MPE DP SERIES II, Operating And Service Manual

Page: 104 / 145

Figure 4.2 ESE and ESR Generation
Query Syntax: *ESR?
Example: *ESR?
Return Parameter: <NR1> (Register value)
Related Commands: *CLS, *ESE, *ESE?
Table 4.4 EVENT STATUS REGISTER
BIT POS. WEIGHT ABBREVIATION DESCRIPTION
0 1 OPC Operation Complete
1 2 NU Not Used
2 4 QYE Query Error
3 8 DDE Device Dependent Error
4 16 EXE Execution Error
5 32 CME Command Error
6 64 NU Not Used
7 128 PON Power On Event, 1 after power on
4.5.3 Read and Set Event Status Enable Register
This command programs the Event Status Enable Register (ESE). The programming determines
which events of the Event Status Register (ESR) set the Event Status Bit (ESB) of the Status Byte
Register (STB). A "1" in the bit position enables the corresponding event. All of the enabled
events of the ESE are logically OR’d to cause the ESB of the STB to be set.
Command Syntax: *ESE <NR1>
91