IEF-G9010 Series User Manual
86
The Firmware Management Screen
Use the [Firmware Management] screen to:
•
View the firmware information of the device.
•
Upgrade the device firmware.
Viewing Device Firmware Information
Steps:
1.
Go to [Administration] > [Firmware Management].
2.
The [Firmware Management] pane shows information for the two partitions including [Partition #],
[Partition Name], [Partition Status], [Firmware Version], and [Firmware Build Date].
NOTE
The IEF-G9010 Series can have up to two firmware versions installed at any time. Each firmware is
installed on its own separate partition. At any given point in time, one partition will be designated as
[Running], which indicates it is the currently active firmware. The other partition will have the [Standby]
status, acting as the standby partition. To make the standby firmware the running firmware, refer to
Rebooting and Applying Firmware
Updating the Firmware
Steps:
1.
Go to [Administration] > [Firmware Management].
NOTE
When upgrading the firmware, the firmware will always be installed to the [Standby] partition. Therefore,
firmware upgrading is only available for the [Standby] partition.
2.
Click the
Upgrade Firmware
button in the Actions column of the [Standby] partition.
3.
In the [Firmware Update] window, click
Select
to navigate to the location of the firmware file and click
Upload
to begin the upgrade process.
4.
Once successfully updated, you can make the standby firmware the running firmware. Refer to
