IEF-G9010 Series User Manual
33
a.
Enable Static Route:
Use the toggle to enable or disable the route.
b.
Rule Name:
Enter a name for the route.
c.
(Optional)
Description:
Enter a description for the route.
d.
Destination Address:
Enter the route’s destination address.
e.
Subnet Mask:
Enter the subnet mask. If the destination is a single IP address, the subnet should
be set to 255.255.255.255. If the destination is a subnet, enter the subnet mask to match the
destination IP range, for example 255.255.255.0.
f.
Configure the Next Hop Type.
i.
Gateway IP Address:
If the next hop is a gateway, enter the gateway’s IP. The gateway must
be in the same network as the forwarding interface.
ii.
Network Interface:
If the next hop is an interface on the device, select the interface from the
drop-down menu.
g.
Metric:
Enter a metric for the route. This determines which static route to use based on the
specified metric. A lower number represents a higher priority.
4.
Click
Ok
.
5.
On the Routes overview page, click
Save
to save your settings.
