IEF-G9010 Series User Manual
68
•
Protocol filter profiles
Configuring Protocol Filter Profiles
Steps:
1.
Go to [Security] > [Policy Enforcement].
The [Policy Enforcement Rule List] screen will appear
2.
Click the
Add
button to add a new policy rule.
3.
Configure the following settings:
a.
Status
: Click the toggle to enable or disable the rule.
b.
Rule Name
: Enter a name for the rule.
c.
(Optional)
Description
: Enter a description for the rule.
4.
In the [Source and Destination Selection] section, configure the following settings:
a.
Select the source and destination IP or IP object profile from the drop-down menu.
i.
Any
ii.
Single IP
iii.
IP Range
iv.
IP Subnet
v.
IP Object
NOTE
If you select
Object
, you will need to select the IP object from a previously created IP object profile.
