Moxa Technologies IEF-G9010 Series User Manual Download Page 80

Page: 80 / 90

IEF-G9010 Series User Manual

System Management

Use the [System Management] screens to do the following:

•

Configure the host name and location information of the device.

•

Configure the IP addresses that are allowed to manage the device.

•

Choose the protocols and ports that can be used to manage the device.

Configuring the Device Name and Device Location

Information

Steps:

Go to [Administration] > [System Management].

In the [System Setting] pane, enter the host name and location information for the device.

Configuring the Management Client Access Control List

Steps:

Go to [Administration] > [System Management].

In the [Access Control List] pane, configure the following setting:

Use the toggle to enable or disable access control for the specified management clients.

Provide the IP address(es) that are allowed to manage the device.

Summary of Contents for IEF-G9010 Series


























































































Search results

Summary of Contents for IEF-G9010 Series

Reviews:

Moxa Technologies IEF-G9010 Series, User Manual, Page: 80 / 90

Search results

Summary of Contents for IEF-G9010 Series

Reviews: